BOARD MEETING DATE: December 2, 2005
AGENDA NO. 14

REPORT:

Rule and Control Measure Forecast

SYNPOSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2006.

RECOMMENDED ACTIONS:
Receive and file.

Barry R. Wallerstein, D.Env.
Executive Officer


Background

AQMD is required by State law to publish a list of all rules potentially scheduled for consideration during the coming year. This Rule and Control Measure Forecast Report is expanded for said purpose. In order to implement the 2003 AQMP, continue to reduce exposure to toxic air contaminants, and address CARB and U.S. EPA concerns, staff may potentially bring approximately 32 proposed rulemakings before the Board in 2006. In addition, as part of implementing the adopting resolution of the 2003 AQMP, staff will complete five feasibility analyses. Approximately six rules or rule amendments will be considered by the Board in 2006 as strategies to reduce air toxic emissions, of which two will be designed to address railyard and locomotive emissions.

2006 MASTER CALENDAR

Advance Target for Board Hearings

Below is a list of all rulemaking activity scheduled for the year 2006. The last three columns refer to the type of rule adoption or amendment: AQMP refers to the adoption and implementation of AQMP control measures (Attachment A); Toxics refers to the adoption and implementation of programmatic as well as source-specific toxic-related rules (Attachment B); and Other refers to administrative rules or changes to an existing rule to clarify or improve rule enforceability, SIP corrections, or implementing state or federal regulations (Attachment C). A more detailed description of the proposed rule adoption or amendment is located after this calendar under the type of rule adoption or amendment (i.e. AQMP, Toxics, and Other).

*An asterisk indicates that the rulemaking is a potentially significant hearing.
+This proposed rule will reduce criteria air contaminants and assist toward attainment
of ambient air quality standards.

2006

 

JANUARY

 

AQMP

TOXICS

OTHER

1107

Coating of Metal Parts and Products (CTS-10)

√

 

 

FEBRUARY

 

 

 

 

1157

PM 10 Emission Reductions from Aggregate and Related Operations

 

 

√

1195

Clean On-Road School Buses

 

 

√

1309.1

Priority Reserve

 

 

√

3501*

 

3502*

Recordkeeping for Locomotive Idling

Minimization of Emissions from Long Duration Idling

 

√

 

√

 

MARCH

 

 

 

 

223*

Facility Permit – Agricultural Facilities (SB 700)

 

 

√

403

Fugitive Dust

 

 

√

1146.2*  +

Emissions of Oxides of Nitrogen from Large Water Heaters and Small Boilers

√

 

 

APRIL

 

 

 

 

219

Equipment Not Requiring a Written Permit Pursuant to Regulation II

 

 

√

410*

Odor Abatement for Solid Waste Transfer Stations and Processing Facilities

 

 

√

1304*

1306*

1315*

Exemptions

Emission Calculations

NSR Tracking System

 

 

√

√

√

MAY

 

 

 

 

1132

Further Control of VOC Emissions from High-Emitting Spray Booth Facilities

 

 

√

1146*  +

Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters

√

 

 

1178*

Further Reductions of VOC Emissions from Storage Tanks at Petroleum Facilities

 

 

√

JUNE

 

 

 

 

Reg. III

Fees

 

 

√

1110.2*

Emissions from Gaseous- and Liquid-Fueled Engines

 

 

√

1146.1*  +

Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters

√

 

 

1470

Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines

 

√

 

JULY

 

 

 

 

1470.1*

Risk Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines[1]

 

√

 

SEPTEMBER

 

 

 

 

313*

 

222*

Emissions Fees for Architectural Coatings

Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II

 

 

√

 

√

1173*

Control of Volatile Organic Compound Leaks and Releases from Components at Petroleum Facilities and Chemical Plants

√

 

 

1187*+

PM Emissions from Wood-Burning Fireplaces and Wood Stoves
(MSC-06)

√

 

 

OCTOBER

 

 

 

 

1402.1*

Control of Toxic Air Contaminants from Existing Sources Located Near Sensitive Receptors

 

√

 

NOVEMBER

 

 

 

 

1130.2*

Inkjet Printing Operations

√

 

 

1144+

Lubricants and Rust Inhibitors

√

 

 

DECEMBER

 

 

 

 

Reg. IX

Reg. X

Standards of Performance for New Stationary Sources (NSPS)
National Emission Standards for Hazardous Air Pollutants (NESHAPS)

 

 

√

√

1114*

Control of Emissions from Refinery Coking Operations

√

 

 

1471

Agricultural Stationary Compression Ignition Engines

 

√

 

 TO-BE-DETERMINED 2006

 

To Be Determined   AQMP TOXICS OTHER

102

Definition of Terms

 

 

√

222

Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II

 

 

√

Reg. II

Permits

 

 

√

401

Visible Emissions

 

 

√

433+

Natural Gas Fuel Specification (MSC-07)

√

 

 

442

Usage of Solvents

 

 

√

443.2

New Labeling Rule

 

 

√

444

Open Burning

 

 

√

461*

Gasoline Transfer and Dispensing

 

 

√

1105.1*  +

Reduction of PM10 and Ammonia Emissions from Fluid Catalytic Cracking Units

 

 

√

1112.1

Emissions of Particulate Matter from Cement Kilns

 

 

√

1113*  +

Architectural Coatings

 

 

√

1121*  +

Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters

√

 

√

1127.1+

Control of Emissions from Hog and Poultry Operations

√

 

√

1133.3

Emissions Reduction from Green Waste Composting

√

 

 

1149*

Storage Tank Cleaning and Degassing

√

 

 

1151*+

Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations

 

 

√

1156


 

1157

PM10 Emissions Reductions from Cement Manufacturing Operations (BCM-08)

PM 10 Emission Reductions from Aggregate and Related Operations (Phase II)

 

 

√


 

√

1158

Storage, Handling, and Transport of Petroleum Coke

 

 

√

1175*  +

Control of Emissions from the Manufacture of Polymeric Cellular (Foam) Products

 

 

√

1186.1

1193


1195

Less Polluting Sweepers

Clean On-Road Residential and Commercial Refuse Collection Vehicles

Clean On-Road School Buses

 

 

√

√


√

1192

Clean On-Road Transit Buses

 

 

√

1190 Series

Fleet Vehicle Requirements

 

 

√

1302

Definitions

 

 

√

Reg. XIII

New Source Review

 

 

√

1401

 

1402

New Source Review of Toxic Air Contaminants

Control of Toxic Air Contaminants from Existing Sources

 

√

 

√

 

1407

Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations

 

√

 

1420

Emissions Standard for Lead

 

√

 

1421

Control of Perchloroethylene Emissions from Dry Cleaning Systems

 

√

 

1426

Emissions from Metal Finishing Operations

 

√

 

1437*

Furniture Stripping Operations

 

√

 

1469

Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations

 

√

 

1470

Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines

 

 

√

3504

Diesel Risk Reductions for Railyard Operations

 

√

 

3510

Indirect Source Rule for Off-Road Mobile Vehicles and Equipment (FSS-06)

√

 

 

3511

Indirect Source Rule for On-Road Mobile Sources (FSS-06)

√

 

 

Reg. XVI

Reg. XXV

Credit Generation

Intercredit Trading

 

 

√

√

Reg. IV, IX, X, XI, XIV, and XX Rules

Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment.

√

√

√

Reg. XXX*

Title V Permits

 

 

√

Note:

AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment to public health or welfare, state regulatory requirements or SIP commitment.


[1]               Pending rule development outcome, Rules 1401 and 1402 may be amended to avoid duplicative or conflicting requirements.

Attachment (DOC 208KB)

/ / /