BOARD MEETING DATE: May 5, 2006
AGENDA NO. 20

REPORT:

Rule and Control Measure Forecast

SYNOPSIS: 

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2006.

COMMITTEE: 

Not Applicable

RECOMMENDED ACTION:

Receive and file.

Barry R. Wallerstein, D.Env.
Executive Officer


The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule.  Scheduling changes that occurred since last month’s forecast are summarized. 

1113   

Architectural Coatings
Rule 1113 is moved to June from May to allow more time to complete CEQA process.

1146 

Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
Rule 1146 is moved to November to allow staff more time to complete the technical analysis and allow adequate public participation.

1146.1

Emissions of Oxides of Nitrogen from Small Industrial,  Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
Rule 1146.1 is moved to December to allow staff more time to complete technical analysis and allow adequate public participation.

1171

Solvent Cleaning Operation
Rule 1171 is moved from TBD to June to meet a July 1 compliance deadline.  Results of a recently-completed technology assessment indicate that additional time is necessary to evaluate long-term effects on printing product quality and to allow an adequate transition period for the affected industry.

1401
1402

New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources

Rules1401 and 1402 are moved forward to October to address diesel internal combustion engines in AB 2588 and public notification for these engines, dry cleaners and gas stations.

2006 MASTER CALENDAR
Advance Target for Board Hearings

Below is a list of all rulemaking activity scheduled for the year 2006. The last three columns refer to the type of rule adoption or amendment: AQMP refers to the adoption and implementation of AQMP control measures (Attachment A); Toxics refers to the adoption and implementation of programmatic as well as source-specific toxic-related rules (Attachment B); and Other refers to administrative rules or changes to an existing rule to clarify or improve rule enforceability, SIP corrections, or implementing state or federal regulations (Attachment C). A more detailed description of the proposed rule adoption or amendment is located after this calendar under the type of rule adoption or amendment (i.e. AQMP, Toxics, and Other).

* An asterisk indicates that the rulemaking is a potentially significant hearing.
+ This proposed rule will reduce criteria air contaminants and assist toward attainment
   of ambient air quality standards.

2006

JUNE

 

AQMP

TOXICS

OTHER

223*

Facility Permit – Agricultural Facilities (SB 700)

 

 

√

Reg. III

Fees

 

 

√

1113*  +

Architectural Coatings

√

 

 

1157

PM10 Emission Reductions from Aggregate and Related Operations

 

 

√

1171

Solvent Cleaning Operations

 

 

√

1304*

1306*

1315*

Exemptions

Emission Calculations

NSR Tracking System

 

 

√

√

√

1470

Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines

 

√

 

JULY

 

 

 

 

410*

Odor Abatement for Solid Waste Transfer Stations and Processing Facilities

 

 

√

1302

1309.1

Definitions

Priority Reserve

 

 

√

√

1470.1*

Risk Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines[1]

 

√

 

SEPTEMBER

 

AQMP

TOXICS

OTHER

313*

 

222*

Emissions Fees for Architectural Coatings

Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II

 

 

√

 

√

403

Fugitive Dust

 

 

√

1110.2*

Emissions from Gaseous- and Liquid-Fueled Engines

 

 

√

1173*

Control of Volatile Organic Compound Leaks and Releases from Components at Petroleum Facilities and Chemical Plants

√

 

 

1187*+

PM Emissions from Wood-Burning Fireplaces and Wood Stoves
(MSC-06)

√

 

 

4010* +

Emissions Inventory and Health Risk Assessment for Ports and Port-Related Facilities

√

√

 

OCTOBER

 

 

 

 

1401

 

1402

New Source Review of Toxic Air Contaminants

Control of Toxic Air Contaminants from Existing Sources

 

√

 

1402.1*

Control of Toxic Air Contaminants from Existing Sources Located Near Sensitive Receptors

 

√

 

NOVEMBER

 

 

 

 

1130.2*

Inkjet Printing Operations

√

 

 

1144+

Lubricants and Rust Inhibitors

√

 

 

1146*  +

Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters

√

 

 

DECEMBER

 

AQMP

TOXICS

OTHER

Reg. IX

Reg. X

Standards of Performance for New Stationary Sources (NSPS)
National Emission Standards for Hazardous Air Pollutants (NESHAPS)

 

 

√

√

1114*

Control of Emissions from Refinery Coking Operations

√

 

 

1146.1*  +

Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters

√

 

 

1471

Agricultural Stationary Compression Ignition Engines

 

√

 

4030* +

New Source Review for Port and Port-Related Equipment

√

√

 

4035* +

Toxic New Source Review for Port and Port-Related Facilities

√

√

 

TO-BE-DETERMINED 2006

To-Be-Determined

 

AQMP

TOXICS

OTHER

102

Definition of Terms

 

 

√

120

New Source Review for Attainment Pollutants

 

√

 

222

Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II

 

 

√

Reg. II

Permits

 

 

√

401

Visible Emissions

 

 

√

433+

Natural Gas Fuel Specification (MSC-07)

√

 

 

442

Usage of Solvents

 

 

√

443.2

Labeling of Material Containing Rule 1401 Compounds

 

 

√

444

Open Burning

 

 

√

461*

Gasoline Transfer and Dispensing

 

 

√

462

Organic Liquid Loading

 

 

√

463

Storage of Organic Liquids

 

 

√

1105.1*  +

Reduction of PM10 and Ammonia Emissions from Fluid Catalytic Cracking Units

 

 

√

1112.1

Emissions of Particulate Matter from Cement Kilns

 

 

√

1113*  +

Architectural Coatings

√

 

 

1121*  +

Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters

√

 

√

1127.1+

Control of Emissions from Hog and Poultry Operations

√

 

√

1133.3

Emissions Reduction from Green Waste Composting

√

 

 

1149*

Storage Tank Cleaning and Degassing

√

 

 

1151*+

Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations

 

 

√

1156


 

1157

PM10 Emissions Reductions from Cement Manufacturing Operations (BCM-08)

PM10 Emission Reductions from Aggregate and Related Operations (Phase II)

 

 

√


 

√

1158

Storage, Handling, and Transport of Petroleum Coke

 

 

√

1162

Polymer Resin Operations

 

 

√

1175*  +

Control of Emissions from the Manufacture of Polymeric Cellular (Foam) Products

 

 

√

1186.1

1193


1195

Less Polluting Sweepers

Clean On-Road Residential and Commercial Refuse Collection Vehicles

Clean On-Road School Buses

 

 

√

√


√

1192

Clean On-Road Transit Buses

 

 

√

1198

Intermodal Equipment

√

√

 

1190 Series

Fleet Vehicle Requirements

 

 

√

Reg. XI

Source Specific Standards

 

 

√

Reg. XIII

New Source Review

 

 

√

1401

 

1402

New Source Review of Toxic Air Contaminants

Control of Toxic Air Contaminants from Existing Sources

 

√

 

√

 

1403

Asbestos Emissions from Demolition/Renovation Activities

 

 

√

1407

Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations

 

√

 

1420

Emissions Standard for Lead

 

√

 

1421

Control of Perchloroethylene Emissions from Dry Cleaning Systems

 

√

 

1426

Emissions from Metal Finishing Operations

 

√

 

1437*

Furniture Stripping Operations

 

√

 

1469

Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations

 

√

 

1470

Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines

 

 

√

2202

On-Road Motor Vehicle Mitigation Options

√

 

√

3504

Diesel Risk Reductions for Railyard Operations

 

 

√

3510

Indirect Source Rule for Off-Road Mobile Vehicles and Equipment (FSS-06)

√

 

 

3511

Indirect Source Rule for On-Road Mobile Sources (FSS-06)

√

 

 

Reg. XVI

Reg. XXV

Credit Generation

Intercredit Trading

 

 

√

√

Reg. IV, IX, X, XI, XIV, and XX Rules

Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment.

√

√

√

Reg. XXX*

Title V Permits

 

 

√

Reg. XXXX

Port Facility Control Measures

√

√

 
Note: AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment to public health or welfare, state regulatory requirements or SIP commitment.

[1]  Pending rule development outcome, Rules 1401 and 1402 may be amended to avoid duplicative or conflicting requirements.



 

This page updated: June 30, 2015
URL: ftp://lb1/hb/2006/May/060520a.html