BOARD MEETING DATE: April 6, 2007
AGENDA NO. 25

REPORT:

Rule and Control Measure Forecast

SYNOPSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2007.

COMMITTEE:

Not Applicable

RECOMMENDED ACTION:

Receive and file.

Barry R. Wallerstein, D.Env.
Executive Officer


The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule.  Scheduling changes that occurred since last month’s forecast are summarized.

314*
222.1*

Fees for Architectural Coatings
Filing and Registration of Architectural Coatings

Proposed Rules 314 and 222.1 (formerly 222) are moved to July from May to finalize analysis and allow time for public review and comment.

1173*

Control of Volatile Organic Compound Leaks and Releases from Components at Petroleum Facilities and Chemical Plants

Rule 1173 is moved to June from April to allow additional time for public review and comment.

Rules to be rescheduled/removed and added (continued)

1175*+

Control of Emissions from the Manufacture of Polymeric Cellular (Foam)
 Products

Rule 1175 is moved to June from May to allow for additional time for public review and comment.

1401
1402

New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources

Rules 1401 and 1402 are moved to July from May to allow further time for analysis and to allow staff additional time to work with stakeholders.

1470

Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines

Rule 1470 is moved forward to June to propose amendments to modify requirements for direct-drive fire pumps.

1472

Risk Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines

Proposed Rule 1472 is moved to July from May for additional analysis and allow time for public review and comment.

2002

Allocations for Oxides of Nitrogen (NOx) and Oxides of Sulfur (SOx)
Requirements

Rule 2002 is removed from the calendar (April) and will be addressed as part of a future RECLAIM amendment.

 

2007 MASTER CALENDAR
Advance Target for Board Hearings

Below is a list of all rulemaking activity scheduled for the year 2007. The last three columns refer to the type of rule adoption or amendment: AQMP refers to the adoption and implementation of AQMP control measures (Attachment A); Toxics refers to the adoption and implementation of programmatic as well as source-specific toxic-related rules (Attachment B); and Other refers to administrative rules or changes to an existing rule to clarify or improve rule enforceability, SIP corrections, or implementing state or federal regulations (Attachment C). A more detailed description of the proposed rule adoption or amendment is located after this calendar under the type of rule adoption or amendment (i.e. AQMP, Toxics, and Other).

*An asterisk indicates that the rulemaking is a potentially significant hearing.
+This proposed rule will reduce criteria air contaminants and assist toward attainment
of ambient air quality standards.

2007

May

 

AQMP

TOXICS

OTHER

219

Equipment Not Requiring a Written Permit Pursuant to Regulation II

 

 

Reg. III

Fees

 

 

June

 

 

 

 

1110.2*

Emissions from Gaseous- and Liquid-Fueled Engines

 

 

1146*  +

Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters

 

 

1146.1*  +

Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters

 

 

1173*

Control of Volatile Organic Compound Leaks and Releases from Components at Petroleum Facilities and Chemical Plants (FUG-01)

 

 

1175*+

Control of Emissions from the Manufacture of Polymeric Cellular (Foam) Products

 

 

1470

Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines

 

 

1903*

Mitigation Program for General Conformity Projects (EGM-02)

 

 

Reg. XL

Port Facility Control Measures (MOB-03)

 

July

 

 

 

 

314*
222.1*

Fees for Architectural Coatings
Filing and Registration of Architectural Coatings

 

 


1139 (Phase II)

Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities

 

 

1162

Polyester Resin Operations
(MSC-07)

 

 

1401

1402

New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources

 



 

1402.1*

Control of Toxic Air Contaminants from Existing Sources Located Near Sensitive Receptors

 

 

1472

Risk Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines

 

 

September

 

 

 

 

1143

Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners

 

 

1171

Solvent Cleaning Operations

 

 

October

 

 

 

 

1114*

404

Control of Emissions from Refinery Coking Operations
Particulate Matter – Concentration



 

 

1403

Asbestos Emissions from Demolition/Renovation Activities

 

 

1471

Agricultural Stationary Compression Ignition Engines

 

 

November

 

 

 

 

444

Open Burning (BCM-04)

 

 

December

 

 

 

 

443.2

Consumer Product Labeling (CTS-03)

 

1125

Metal Container, Closure, and Coil Coating Operations (MCS-01)

 

 

1149*

Storage Tank Degassing (FUG-04)

   

Reg. XX

RECLAIM (CMB-02)

 

 

  TO-BE-DETERMINED 2007

To-Be-Determined

 

AQMP

TOXICS

OTHER

102

Definition of Terms

 

 

222

Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II

 

 

Reg. II

Permits

 

 

401

Visible Emissions

 

 

403

Fugitive Dust

 

 

433 +

Natural Gas Fuel Specification (MSC-07)

 

 

442

Usage of Solvents

 

 

461*

Gasoline Transfer and Dispensing

 

 

462

Organic Liquid Loading

 

 

463

Storage of Organic Liquids

 

 

Reg. IV
Reg. XI

Prohibitions
Source Specific Standards
(MSC-07)

 

 


1104

Wood Flat Stock Coating Operations

 

 

1107

Coating of Metal Parts and Products

 

 

1108

Cutback Asphalt

 

 

1108.1

Emulsified Asphalt

 

 

1112.1

Emissions of Particulate Matter from Cement Kilns

 

 

1113*  +

Architectural Coatings

 

 

1115

Motor Vehicle Assembly Line Coating Operations

 

 

1118

Control of Emissions from Refinery Flares

 

 

1121*  +

Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters

 

1127

Emission Reductions from Livestock Waste

 

 

1127.1+

Control of Emissions from Hog and Poultry Operations

 

1128

Paper, Fabric, and Film Cleaning Operations

 

 

1130

Graphic Arts

 

 

1130.2*

Inkjet Printing Operations

 

 

1133.3

Emissions Reduction from Green Waste Composting

 

 

1136

Wood Products Coatings

 

 

1142

Marine Tank Vessel Operations

 

 

1151*+

Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations

 

 

1156

1157

PM10 Emissions Reductions from Cement Manufacturing Operations
PM10 Emission Reductions from Aggregate and Related Operations (BCM-01)

 

 



1158

Storage, Handling, and Transport of Petroleum Coke

 

 

1166

Volatile Organic Compound Emissions from Decontamination of Soil

 

 

1168

Adhesive and Sealant Applications

 

 

1174

Control of Volatile Organic Compound Emissions from the Ignition of Barbecue Charcoal

 

 

1180

Petroleum Refinery Pilot Program  (FLX-02)

 

 

1186.1
1193


1195

Less Polluting Sweepers
Clean On-Road Residential and Commercial Refuse Collection Vehicles
Clean On-Road School Buses

 

 





1192

Clean On-Road Transit Buses

 

 

1198

Intermodal Equipment

 

1190 Series

Fleet Vehicle Requirements

 

 

Reg. XIII

New Source Review

 

 

1401

1402

New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources

 



 

1407

Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations

 

 

1420

Emissions Standard for Lead

 

 

1421

Control of Perchloroethylene Emissions from Dry Cleaning Systems

 

 

1426

Emissions from Metal Finishing Operations

 

 

1437*

Furniture Stripping Operations

 

 

1469

Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations

 

 

Reg. XVI
Reg. XXV

Credit Generation
Intercredit Trading

 

 


2202

On-Road Motor Vehicle Mitigation Options

 

3501

Recordkeeping for Locomotive Idling

 

 

3502

Minimization of Emissions from Locomotive Idling

 

 

3503

Emission Inventory and Health Risk Assessment for Railyards

 

 

3504

Diesel Risk Reductions for Railyard Operations

 

 

3510

Indirect Source Rule for Off-Road Mobile Vehicles and Equipment

 

 

3511

Indirect Source Rule for On-Road Mobile Sources

 

 

Reg. IV, IX, X, XI, XIV, and XX Rules

Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment.

Reg. XL

Port Facility Control Measures

 

 

     

 

Note:  AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment
          to public health or welfare, state regulatory requirements or SIP commitment.



This page updated: June 26, 2015
URL: ftp://lb1/hb/2007/April/070425a.htm