BOARD MEETING DATE: July 13, 2007
AGENDA NO. 18

REPORT:

Rule and Control Measure Forecast

SYNOPSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2007.

COMMITTEE:

Not Applicable

RECOMMENDED ACTION:

Receive and file.

Barry R. Wallerstein, D.Env.
Executive Officer


The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule. Scheduling changes that occurred since last month’s forecast are summarized.

445*+ PM Emissions from Wood-Burning Fireplaces and Wood Stoves
(BCM-03)
Proposed Rule 445 is moved to November from July to allow additional time to reflect 2007 AQMP commitments, respond to public comments and conduct outreach on changes to staff proposal.
461* Gasoline Transfer and Dispensing
Rule 461 is scheduled for the 1st quarter of 2008 to implement AQMP Control Measure FUG-02, establish Increments of Progress for Implementation of Phase II Enhanced Vapor Recovery (EVR) and In-Station Diagnostics (ISD) and provide an incentive program for early compliance with EVR and ISD requirements
1110.2* Emissions from Gaseous- and Liquid-Fueled Engines
Rule 1110.2 is moved to October from September to allow staff additional time for analysis and stakeholder input.
1112.1 Emissions of Particulate Matter from Cement Kilns
Rule 1112.1 is moved forward to September to establish an alternative averaging limit for grey Portland Cement kilns to that in Rule 407, contingent upon meeting CO mass emission limitations.
1143 Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners
Proposed Rule 1143 is moved to December from September for further discussions and review with shakeholderts.
1146* +

1146.1* +
Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
Rules 1146 and 1146.1 are moved to November from September to allow staff additional time to incorporate the provisions of MCS-01 – Facility Modernization.
1162 Polyester Resin Operations
(MSC-07)
Rule 1162 is moved to the 1st quarter of 2008 to establish technology forcing VOC limits for low-monomer content polyester resins.
1171 Solvent Cleaning Operations
Rule 1171 has been taken off the current calendar because no amendments are expected this year.
1175*+ Control of Emissions from the Manufacture of Polymeric Cellular (Foam) Products
Rule 1175 is moved to September from July to allow additional time for stakeholder review and input.
1903* Mitigation Program for General Conformity Projects (EGM-02)
Proposed Rule 1903 is moved to December from September to allow additional time for rule development.
Reg. XL
4010

4020
Port Facility Control Measures (MOB-03)
Rule 4010 Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions
Backstop of Requirements of New and Modified Port Projects
Proposed Rules 4010 and 4020 are moved to December from September to allow staff additional time to work with stakeholders.

 

2007 MASTER CALENDAR
Advance Target for Board Hearings

Below is a list of all rulemaking activity scheduled for the year 2007. The last three columns refer to the type of rule adoption or amendment: AQMP refers to the adoption and implementation of AQMP control measures (Attachment A); Toxics refers to the adoption and implementation of programmatic as well as source-specific toxic-related rules (Attachment B); and Other refers to administrative rules or changes to an existing rule to clarify or improve rule enforceability, SIP corrections, or implementing state or federal regulations (Attachment C). A more detailed description of the proposed rule adoption or amendment is located after this calendar under the type of rule adoption or amendment (i.e. AQMP, Toxics, and Other).

*An asterisk indicates that the rulemaking is a potentially significant hearing.
+This proposed rule will reduce criteria air contaminants and assist toward attainment
of ambient air quality standards.

2007

September   AQMP TOXICS OTHER
1112.1 Emissions of Particulate Matter from Cement Kilns    
1175*+ Control of Emissions from the Manufacture of Polymeric Cellular (Foam) Products    
October        
222.1* Filing and Registration of Architectural Coatings    
314* Fees for Architectural Coatings    
1110.2* Emissions from Gaseous- and Liquid-Fueled Engines    
1139
(Phase II)
Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities    
1401

1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
 

 
1403 Asbestos Emissions from Demolition/Renovation Activities    
1471 Agricultural Stationary Compression Ignition Engines    
1472 Risk Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines    
November        
444 Open Burning (BCM-04)    
445*+ PM Emissions from Wood-Burning Fireplaces and Wood Stoves
(BCM-03)
   
1146* +



1146.1* +
Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters




   
1402.1* Control of Toxic Air Contaminants from Existing Sources Located Near Sensitive Receptors    
December        
443.2 Consumer Product Labeling (CTS-03)  
1125 Metal Container, Closure, and Coil Coating Operations (MCS-01)    
1143 Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners    
1149* Storage Tank Degassing (FUG-04)    
1903* Mitigation Program for General Conformity Projects (EGM-02)    
Reg. XX RECLAIM (CMB-02)    
Reg. XL

4010



4020
Port Facility Control Measures (MOB-03)
Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions
Backstop of Requirements for New and Modified Port Projects












 

2008

1st Qtr   AQMP TOXICS OTHER
461* Gasoline Transfer and Dispensing    
1162 Polyester Resin Operations
(MSC-07)
   

TO-BE-DETERMINED 2007

To-Be-Determined   AQMP TOXICS OTHER
102 Definition of Terms    
222 Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II    
Reg. II Permits    
401 Visible Emissions    
403 Fugitive Dust    
433 + Natural Gas Fuel Specification (MSC-07)    
442 Usage of Solvents    
462 Organic Liquid Loading    
463 Storage of Organic Liquids    
Reg. IV
Reg. XI
Prohibitions
Source Specific Standards
(MSC-07)
   
1104 Wood Flat Stock Coating Operations    
1107 Coating of Metal Parts and Products    
1108 Cutback Asphalt    
1108.1 Emulsified Asphalt    
1114*

404
Control of Emissions from Refinery Coking Operations
Particulate Matter – Concentration


   
1115 Motor Vehicle Assembly Line Coating Operations    
1118 Control of Emissions from Refinery Flares    
1121* + Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters  
1127 Emission Reductions from Livestock Waste    
1127.1+ Control of Emissions from Hog and Poultry Operations  
1128 Paper, Fabric, and Film Cleaning Operations    
1130 Graphic Arts    
1130.2* Inkjet Printing Operations    
1133.3 Emissions Reduction from Green Waste Composting    
1136 Wood Products Coatings    
1142 Marine Tank Vessel Operations    
1151*+ Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations    
1156

1157
PM10 Emissions Reductions from Cement Manufacturing Operations
PM10 Emission Reductions from Aggregate and Related Operations (BCM-01)
   

1158 Storage, Handling, and Transport of Petroleum Coke    
1166 Volatile Organic Compound Emissions from Decontamination of Soil    
1168 Adhesive and Sealant Applications    
1171 Solvent Cleaning Operations    
1174 Control of Volatile Organic Compound Emissions from the Ignition of Barbecue Charcoal    
1180 Petroleum Refinery Pilot Program (FLX-02)    
1186.1
1193


1195
Less Polluting Sweepers
Clean On-Road Residential and Commercial Refuse Collection Vehicles
Clean On-Road School Buses
   



1192 Clean On-Road Transit Buses    
1198 Intermodal Equipment  
1190 Series Fleet Vehicle Requirements    
Reg. XIII New Source Review    
1401

1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
 

 
1407 Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations    
1420 Emissions Standard for Lead    
1421 Control of Perchloroethylene Emissions from Dry Cleaning Systems    
1426 Emissions from Metal Finishing Operations    
1437* Furniture Stripping Operations    
1469 Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations    
Reg. XVI
Reg. XXV
Credit Generation
Intercredit Trading
   
2202 On-Road Motor Vehicle Mitigation Options  
3501 Recordkeeping for Locomotive Idling    
3502 Minimization of Emissions from Locomotive Idling    
3503 Emission Inventory and Health Risk Assessment for Railyards    
3504 Diesel Risk Reductions for Railyard Operations    
3510 Indirect Source Rule for Off-Road Mobile Vehicles and Equipment    
3511 Indirect Source Rule for On-Road Mobile Sources    
Reg. IV, IX, X, XI, XIV, and XX Rules Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment.
Reg. XL Port Facility Control Measures  
Note: AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment to public health or welfare, state regulatory requirements or SIP commitment.
 

Attachment (DOC 245kb)

MS Word reader link




This page updated: June 26, 2015
URL: ftp://lb1/hb/2007/July/070718a.html