BOARD MEETING DATE: September 7, 2007
AGENDA NO. 22

REPORT:

Rule and Control Measure Forecast

SYNOPSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2007.

COMMITTEE:

Not Applicable

RECOMMENDED ACTION:

Receive and file.

Barry R. Wallerstein, D.Env.
Executive Officer


The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule. Scheduling changes that occurred since last month’s forecast are summarized.

222.1*
314*

Filing and Registration of Architectural Coatings
Fees for Architectural Coatings
Proposed Rules 222.1 and 314 are moved to December from October to allow staff additional time for analysis and review with stakeholders.

208
444

Permit and Burn Authorization for Open Burning
Open Burning
Rule 208 is added to the November schedule and will go to the Board with Rule 444. The addition will improve enforceability of permits issued for open burning.

445*+

PM Emissions from Wood-Burning Fireplaces and Wood Stoves
(BCM-03)
Proposed Rule 445 is moved to the first quarter of 2008 from November to allow additional time for staff to analyze data and work with stakeholders.

1110.2*

Emissions from Gaseous- and Liquid-Fueled Engines
Rule 1110.2 is moved to November from October to allow additional time for completion of CEQA requirements.

1125

Metal Container, Closure, and Coil Coating Operations
Rule 1125 is moved to the first quarter of 2008 from December to allow additional time for staff to analyze data and work with stakeholders.

1139 (Phase II)

Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities
Proposed Rule 1139 is moved to December from October to allow additional time needed for staff analysis and review with stakeholders.

1143

Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners
Rule 1143 is moved to the first quarter of 2008 from December to allow additional time for staff to analyze data and work with stakeholders.

1146* +

1146.1* +

Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
Rules 1146 and 1146.1 are moved to the first quarter of 2008 from December to allow additional time for staff to incorporate a MCS-01 control concept and work with stakeholders.

1401
1402

New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
Rules 1401 and 1402 are moved to December from October to allow additional time for staff to analyze data and work with stakeholders.

1402.1*

Control of Toxic Air Contaminants from Existing Sources Located Near Sensitive Receptors
Proposed Rule 1402.1 is moved to 2008 from November to be re-evaluated as part of the 2008 ATCP revisions.

1471

Agricultural Stationary Compression Ignition Engines
Proposed Rule 1471 is moved to the first quarter of 2008 from October to allow the state ATCM provisions for this source category to be approved.

1472

Risk Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines
Proposed Rule 1472 is moved to December from October to allow additional time for staff to analyze data and work with stakeholders.

1903*

Emission Budgets and Mitigation Program for General Conformity Projects (EGM-02)
Proposed Rule 1903 is moved to the first quarter of 2008 from December to allow additional time for staff to analyze data and work with stakeholders.

Reg. XX

Regional Clean Air Incentives Market (RECLAIM) (CMB-02)
Regulation XX is moved to the second quarter of 2008 from December to allow additional time for staff to perform technology assessments and work with stakeholders.

Reg. XL
4010

4020

Port Facility Control Measures (MOB-03)
Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions
Backstop of Requirements for New and Modified Port Projects
Proposed Rules 4010 and 4020 are moved to the second quarter of 2008 from December to allow staff additional time to complete its current work with the port staff on their Clean Air Action Plan and assessing the approach to backstop the port emission targets.

2007 MASTER CALENDAR
Advance Target for Board Hearings

Below is a list of all rulemaking activity scheduled for the year 2007. The last three columns refer to the type of rule adoption or amendment: AQMP refers to the adoption and implementation of AQMP control measures (Attachment A); Toxics refers to the adoption and implementation of programmatic as well as source-specific toxic-related rules (Attachment B); and Other refers to administrative rules or changes to an existing rule to clarify or improve rule enforceability, SIP corrections, or implementing state or federal regulations (Attachment C). A more detailed description of the proposed rule adoption or amendment is located after this calendar under the type of rule adoption or amendment (i.e. AQMP, Toxics, and Other).

* An asterisk indicates that the rulemaking is a potentially significant hearing.
+ This proposed rule will reduce criteria air contaminants and assist toward attainment
of ambient air quality standards.

2007

October   AQMP TOXICS OTHER
1403 Asbestos Emissions from Demolition/Renovation Activities   √  
November        
208

444
Permit and Burn Authorization for Open Burning
Open Burning (BCM-04)
    √

√
1110.2* Emissions from Gaseous- and Liquid-Fueled Engines     √
December        
222.1*

314*
Filing and Registration of Architectural Coatings
Fees for Architectural Coatings
    √

√
443.2 Consumer Product Labeling (CTS-03) √   √
1139 (Phase II) Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities     √
1149* Storage Tank Degassing (FUG-04) √    
1401

1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
  √

√
 
1472 Risk Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines   √  

 

2008

1st Qtr   AQMP TOXICS OTHER
445*+ PM Emissions from Wood-Burning Fireplaces and Wood Stoves
(BCM-03)
√    
461* Gasoline Transfer and Dispensing     √
1125 Metal Container, Closure, and Coil Coating Operations √    
1143 Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners     √
1146* +



1146.1* +
Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
√



√
   
1162 Polyester Resin Operations
(MSC-07)
√    
1471 Agricultural Stationary Compression Ignition Engines   √  
1903* Emission Budgets and Mitigation Program for General Conformity Projects (EGM-02) √    
2nd Qtr   AQMP TOXICS OTHER
Reg. XX Regional Clean Air Incentives Market (RECLAIM) (CMB-02) √    
Reg. XL

4010



4020
Port Facility Control Measures (MOB-03)
Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions
Backstop of Requirements for New and Modified Port Projects
√

√



√
√

√



√
 
2008        
1402.1* Control of Toxic Air Contaminants from Existing Sources Located Near Sensitive Receptors   √  

 

TO-BE-DETERMINED 2007

To-Be-Determined   AQMP TOXICS OTHER
102 Definition of Terms     √
222 Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II     √
Reg. II Permits     √
401 Visible Emissions     √
403 Fugitive Dust     √
433 + Natural Gas Fuel Specification (MSC-07) √    
442 Usage of Solvents     √
462 Organic Liquid Loading     √
463 Storage of Organic Liquids     √
Reg. IV
Reg. XI
Prohibitions
Source Specific Standards
(MSC-07)
    √
√
1104 Wood Flat Stock Coating Operations     √
1107 Coating of Metal Parts and Products     √
1108 Cutback Asphalt     √
1108.1 Emulsified Asphalt     √
1114*

404
Control of Emissions from Refinery Coking Operations
Particulate Matter – Concentration
√

√
   
1115 Motor Vehicle Assembly Line Coating Operations     √
1118 Control of Emissions from Refinery Flares     √
1121* + Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters √   √
1127 Emission Reductions from Livestock Waste     √
1127.1+ Control of Emissions from Hog and Poultry Operations √   √
1128 Paper, Fabric, and Film Cleaning Operations     √
1130 Graphic Arts     √
1130.2* Inkjet Printing Operations √    
1133.3 Emissions Reduction from Green Waste Composting √    
1136 Wood Products Coatings     √
1142 Marine Tank Vessel Operations     √
1151*+ Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations     √
1156

1157
PM10 Emissions Reductions from Cement Manufacturing Operations
PM10 Emission Reductions from Aggregate and Related Operations (BCM-01)
    √

√
1158 Storage, Handling, and Transport of Petroleum Coke     √
1166 Volatile Organic Compound Emissions from Decontamination of Soil     √
1168 Adhesive and Sealant Applications     √
1171 Solvent Cleaning Operations     √
1174 Control of Volatile Organic Compound Emissions from the Ignition of Barbecue Charcoal     √
1180 Petroleum Refinery Pilot Program (FLX-02) √    
1186.1
1193


1195
Less Polluting Sweepers
Clean On-Road Residential and Commercial Refuse Collection Vehicles
Clean On-Road School Buses
    √
√


√
1192 Clean On-Road Transit Buses     √
1198 Intermodal Equipment √ √  
1190 Series Fleet Vehicle Requirements     √
Reg. XIII New Source Review     √
1401

1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
  √

√
 
1407 Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations   √  
1420 Emissions Standard for Lead   √  
1421 Control of Perchloroethylene Emissions from Dry Cleaning Systems   √  
1426 Emissions from Metal Finishing Operations   √  
1437* Furniture Stripping Operations   √  
1469 Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations   √  
Reg. XVI
Reg. XXV
Credit Generation
Intercredit Trading
    √
√
2202 On-Road Motor Vehicle Mitigation Options √   √
3501 Recordkeeping for Locomotive Idling     √
3502 Minimization of Emissions from Locomotive Idling     √
3503 Emission Inventory and Health Risk Assessment for Railyards     √
3504 Diesel Risk Reductions for Railyard Operations     √
3510 Indirect Source Rule for Off-Road Mobile Vehicles and Equipment √    
3511 Indirect Source Rule for On-Road Mobile Sources √    
Reg. IV, IX, X, XI, XIV, and XX Rules Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment. √ √ √
Reg. XL Port Facility Control Measures √ √  
Note: AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment to public health or welfare, state regulatory requirements or SIP commitment.
 

Attachment (doc 239kb)

MS Word reader link




This page updated: June 26, 2015
URL: ftp://lb1/hb/2007/September/070922a.html