BOARD MEETING DATE: April 4, 2008
AGENDA NO. 19

REPORT:

Rule and Control Measure Forecast

SYNOPSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2008.

COMMITTEE:

Not Applicable

RECOMMENDED ACTION:

Receive and file.

Barry R. Wallerstein, D.Env.
Executive Officer


The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule. Scheduling changes that occurred since last month’s forecast are summarized.

314* Fees for Architectural Coatings
Rule 314 is moved to May from April to allow additional time for imput from the architectural coating industry.
1149* Storage Tank Degassing (FUG-04)
Rule 1149 is moved to May from April to allow additional time for the completion of CEQA analysis and public comment.

Rules to be rescheduled/removed and added (continued)

1302
1303
1701
1702
1703
Definitions
Requirements
General
Definition
Analysis
Amendments to Rules 1302, 1303, 1701, 1702, and 1703 are moved to June from May to allow additional time for public comment on the staff proposal.

2008 MASTER CALENDAR
Advance Target for Board Hearings

Below is a list of all rulemaking activity scheduled for the year 2008.  The last three columns refer to the type of rule adoption or amendment:  AQMP refers to the adoption and implementation of AQMP control measures (Attachment A); Toxics refers to the adoption and implementation of programmatic as well as source-specific toxic-related rules (Attachment B); and Other refers to administrative rules or changes to an existing rule to clarify or improve rule enforceability, SIP corrections, or implementing state or federal regulations (Attachments C).  A more detailed description of the proposed rule adoption or amendment is located after this calendar under the type of rule adoption or amendment (i.e. AQMP, Toxics, and Other).

* An asterisk indicates that the rulemaking is a potentially significant hearing.
+ This proposed rule will reduce criteria air contaminants and assist toward attainment of ambient air qality standards.

2008

May   AQMP TOXICS OTHER
Reg. III Fees     √
314* Fees for Architectural Coatings     √
1149* Storage Tank Degassing (FUG-04) √    
1903* Emission Budgets and Mitigation Program for General Conformity Projects (EGM-02) √    
2449 Control of Oxides of Nitrogen Emissions from Off-Road Diesel Vehicles √    
June        
1108 Cutback Asphalt (FUG-03) √    
1112.1 Emissions of Particulate Matter from Cement Kilns     √
1146* + Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters (MCS-01 & MCS-07) √    
1146.1* + Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters (MCS-01 & MCS-07) √    
1186.1
1196
Less-Polluting Sweepers
Clean-On-Road Heavy-Duty Public Fleet Vehicles
    √
√
1302
1303
1701
1702
1703
Definitions
Requirements
General
Definition
Analysis
    √
√
√
√
√
1610 Old-Vehicle Scrapping     √
July        
208

444
Permit and Burn Authorization for Open Burning
Open Burning (BCM-04)
    √

√
1143 Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners (CTS-04) √    
1145 Plastic, Rubber, and Glass Coatings √    
1158* Storage, Handling, and Transport of Petroleum Coke     √
4010



4020
Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions (MOB-03)
Backstop of Requirements for New and Modified Port Projects (MOB-03)
√



√
√



√
 
September        
433 + Natural Gas Fuel Specification (CMB-04) √    
1147 NOx Reductions from Miscellaneous Sources (CMB-01) √    
October        
1144 VOC Emission Reductions for Lubricants (CTS-01) √    
1155 Particulate Matter Control Devices (BCM-01) √    
1469 Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations   √  
Reg. XX Regional Clean Air Incentives Market (RECLAIM) (CMB-02) √    
November        
1139 Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities (CTS-03) √    
1162 Polyester Resin Operations
(MCS-07)
√    
December        
317 Clean Air Act Emissions Fees for Major Stationary Sources of VOC and NOx √    

TO-BE-DETERMINED 2008

To-Be-Determined   AQMP TOXICS OTHER
102 Definition of Terms     √
222 Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II     √
Reg. II Permits     √
401 Visible Emissions     √
402 Nuisance     √
403 Fugitive Dust     √
404
1114*
Particulate Matter – Concentration
Control of Emissions from Refinery Coking Operations
√
√
   
407 Liquid and Gaseous Air Contaminants     √
461 Gasoline Transfer and Dispensing (FUG-02) √    
462 Organic Liquid Loading     √
463 Storage of Organic Liquids     √
Reg. IV
Reg. XI
Prohibitions
Source Specific Standards
(MCS-07)
    √
√
701 Air Pollution Emergency Contingency Actions     √
1106.1 Pleasure Craft Coating Operations √    
1107 Coating of Metal Parts and Products     √
1108.1 Emulsified Asphalt (FUG-03)     √
1118 Control of Emissions from Refinery Flares     √
1121* + Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters √   √
1124 Aerospace Assembly and Component Manufacturing Operations (MCS-01) √    
1127 Emission Reductions from Livestock Waste     √
1127.1+ Control of Emissions from Hog and Poultry Operations √   √
1133.3 Emissions Reduction from Green Waste Composting √    
1134 Emissions of Oxides of Nitrogen from Stationary Gas Turbines     √
1136 Wood Products Coatings     √
1142 Marine Tank Vessel Operations     √
1146.2 Emissions of Oxides of Nitrogen from Large Water Heaters and Small Boilers and Process Heaters (MCS-07) √    
1151*+ Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations     √
1168 Adhesive and Sealant Applications     √
1171 Solvent Cleaning Operations     √
1174 Control of Volatile Organic Compound Emissions from the Ignition of Barbecue Charcoal     √
1180 Petroleum Refinery Pilot Program (FLX-02) √    
1186.1
1193


1195
Less Polluting Sweepers
Clean On-Road Residential and Commercial Refuse Collection Vehicles
Clean On-Road School Buses
    √
√


√
1192 Clean On-Road Transit Buses     √
1190 Series Fleet Vehicle Requirements     √
1309 Emission Reduction Credits     √
1309.1 Priority Reserve     √
Reg. XIII New Source Review     √
1401

1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
  √

√
 
1402.1* Control of Toxic Air Contaminants from Existing Sources Located Near Sensitive Receptors   √  
1407 Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations   √  
1420 Emissions Standard for Lead   √  
1421 Control of Perchloroethylene Emissions from Dry Cleaning Systems   √  
1426 Emissions from Metal Finishing Operations   √  
1437* Furniture Stripping Operations   √  
1470


1471
Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines
Agricultural Stationary Compression Ignition Engines
  √


√
 
Reg. XVI
Reg. XXV
Credit Generation
Intercredit Trading
    √
√
Reg. XVII Prevention of Significant Deterioration (PSD)     √
2202 On-Road Motor Vehicle Mitigation Options √   √
3501 Recordkeeping for Locomotive Idling     √
3502 Minimization of Emissions from Locomotive Idling     √
3503 Emission Inventory and Health Risk Assessment for Railyards     √
3504 Diesel Risk Reductions for Railyard Operations     √
3510 Indirect Source Rule for Off-Road Mobile Vehicles and Equipment √    
3511 Indirect Source Rule for On-Road Mobile Sources √    

Reg. IV, IX, X, XI, XIV, and XX Rules

Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment. The Air Toxics Control Plan (ATCP) is being updated to include new measures to address toxic emissions in the basin. The revised ATCP will include a variety of measures that will reduce exposure to air toxics from stationary, mobile, and area sources.

√

√

√

Note:  AQMD may add control measures necessary to satisfy federal requirements, to
          abate a substantial endangerment to public health or welfare, state regulatory
          requirements or SIP commitment.

Attachment (doc 44 kb)
MS Word reader link



 

This page updated: June 26, 2015
URL: ftp://lb1/hb/2008/April/080419a.htm