BOARD MEETING DATE: December 5, 2008
AGENDA NO. 14

REPORT:

Rule and Control Measure Forecast

SYNOPSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2009.

COMMITTEE:

Not Applicable

RECOMMENDED ACTIONS:

Receive and file.
 

Barry R. Wallerstein, D.Env.
Executive Officer


The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule. Scheduling changes that occurred since last month’s forecast are summarized.

1156 Further Reductions of Particulate Emissions from Cement Manufacturing Facilities
Proposed Rule 1156 is moved to February 2009 from January to provide additional time for staff analysis, public review and comment.

2009

1st Quarter   AQMP TOXICS OTHER
1302
1303
1701
1702
1703
Definitions
Requirements
General
Definition
Analysis
    √
√
√
√
√
January        
314 Fees for Architectural Coatings     √
1143 Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners (CTS-04) √    
1144 VOC Emission Reductions from Lubricants (CTS-01) √    
1186.1 Less Polluting Sweepers     √
2702 Green House Gas Reduction Fund     √
February        
Reg. IX

Reg. X
Standards for Performance for New Stationary Sources
National Emission Standards for Hazardous Air Pollutants
  √

√
1156 Further Reductions of Particulate Emissions from Cement Manufacturing Facilities   √ √
March        
1155 Particulate Matter Control Devices (BCM-01) √    
1401 New Source Review of Toxic Air Contaminants   √  
April        
102 Definition of Terms     √
433 + Natural Gas Fuel Specification (CMB-04) √    
Reg. XX Regional Clean Air Incentives Market (RECLAIM) (CMB-02) √    
4010* Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions (MOB-03) √ √  
May        
Reg. III Fees     √
1470



1471
Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines
Agricultural Stationary Compression Ignition Engines
  √



√
 
2511 Credit Generation Program for Locomotive Head End Power Unit Engines     √
June        
1111 NOx Emissions from Natural Gas-Fired Fan Type Central Furnaces (CMB-03) √    
1138 Charbroilers (BCM-05) √    
1145 Plastic, Rubber, and Glass Coatings     √
1420 Emissions Standard for Lead   √  
July        
1139 Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities (CTS-03) √    
2301 Control of Emissions from New or Redevelopment Projects     √
September        
1124 Aerospace Assembly and Component Manufacturing Operations (MCS-01) √    
1133.3 Green Waste Composting (MCS-05) √    
October        
461 Gasoline Transfer and Dispensing (FUG-02) √    
1127 Emission Reductions from Livestock Waste (MCS-05) √    
1127.1 Control of Emissions from Hog and Poultry Operations (MCS-05) √   √
1162 Polyester Resin Operations (MCS-07) √    
1315 Federal New Source Review Tracking System     √
November        
402 Nuisance     √
404
1114*
Particulate Matter – Concentration (MCS-01)
Control of Emissions from Refinery Coking Operations (MCS-01)
√
√
   
1903* Emission Budgets and Mitigation Program for General Conformity Projects (EGM-02) √    
December        
Reg. XIII New Source Review (NSR) (PM2.5)     √


2009 TO-BE-DETERMINED

To-Be-Determined   AQMP TOXICS OTHER
Reg. II Permits     √
Reg. IV Prohibitions     √
462 Organic Liquid Loading     √
463 Storage of Organic Liquids     √
Reg. XI Source Specific Standards
(MCS-07)
    √
1106 Marine Coating Operations     √
1106.1 Pleasure Craft Coating Operations (MCS-01) √    
1107 Coating of Metal Parts and Products     √
1112.1 Emissions of Particulate Matter from Cement Kilns     √
1113 Architectural Coatings     √
1115 Motor Vehicle Assembly Line Coating Operations     √
1118 Control of Emissions from Refinery Flares     √
1123 Pilot Program for Refinery Start-up, Shutdown and Turnaround Procedures (MCS-06) √    
1136 Wood Products Coatings     √
1145 Plastic, Rubber, and Glass Coatings     √
1151*+ Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations     √
1168 Adhesive and Sealant Applications     √
1171 Solvent Cleaning Operations     √
1173 Fugitive Emissions of Volatile Organic Compounds and Releases from Components of Petroleum Facilities and Chemical Plants     √
1180 Petroleum Refinery Pilot Program (FLX-02) √    
1190 Series Fleet Vehicle Requirements     √
Reg. XIII New Source Review     √
1480 Major Diesel Indirect Sources   √  
1401

1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
  √

√
 
1407 Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations   √  
1421 Control of Perchloroethylene Emissions from Dry Cleaning Systems   √  
1426 Emissions from Metal Finishing Operations   √  
1610 Old-Vehicle Scrapping     √
1625 Generation of ERCs for Particulate Matter     √
Reg. XVII Prevention of Significant Deterioration (PSD)     √
2202 On-Road Motor Vehicle Mitigation Options √   √
Reg. IV, IX, X, XI, XIV, and XX Rules Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment. The Air Toxics Control Plan (ATCP) is being updated to include new measures to address toxic emissions in the basin. The revised ATCP will include a variety of measures that will reduce exposure to air toxics from stationary, mobile, and area sources. √ √ √
Note: AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment to public health or welfare, state regulatory requirements or SIP commitment.

Attachment (DOC, 221k)

Rule Forecast




This page updated: June 26, 2015
URL: ftp://lb1/hb/2008/December/081214a.htm