BOARD MEETING DATE: July 11, 2008
AGENDA NO. 28

REPORT:

Rule and Control Measure Forecast

SYNOPSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2008.

COMMITTEE:

Not Applicable

RECOMMENDED ACTIONS:

Receive and file.
 

Barry R. Wallerstein, D.Env.
Executive Officer


Background

The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule. Scheduling changes that occurred since last month’s forecast are summarized.
 

433 + Natural Gas Fuel Specification (CMB-04)
Rule 433 is moved to October from September to allow additional time for public input and analysis.
1147 NOx Reductions from Miscellaneous Sources (CMB-01)
Rule 1147 is moved from to November from Steptember to allow additional time to complete analysis and work with stakeholder.
1156 Further Reductions of Particulate Emissions from Cement Manufacturing Facilities
Proposed amendments is added to October to address changes consistent with the original intent of the rule to reduce particulate emissions from cement manufacturing facilities.

 

Rules to be rescheduled/removed and added (continued)

1302
1303
1701
1702
1703
Definitions
Requirements
General
Definition
Analysis
Amendments to Regulation XII and Regulation XVII are moved to October from September to allow additional time to work with stakeholders.


2008

September   AQMP TOXICS OTHER
1108 Cutback Asphalt (FUG-03) √    
1146* + Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters (MCS-01 & MCS-07) √    
1146.1* + Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters (MCS-01 & MCS-07) √    
October        
433 + Natural Gas Fuel Specification (CMB-04) √    
1144 VOC Emission Reductions from Lubricants (CTS-01) √    
1145 Plastic, Rubber, and Glass Coatings √    
1155 Particulate Matter Control Devices (BCM-01) √    
1156 Further Reductions of Particulate Emissions from Cement Manufacturing Facilities     √
October        
1302
1303
1701
1702
1703
Definitions
Requirements
General
Definition
Analysis
    √
√
√
√
√
1469 Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations   √  
1903* Emission Budgets and Mitigation Program for General Conformity Projects (EGM-02) √    
Reg. XX Regional Clean Air Incentives Market (RECLAIM) (CMB-02) √    
November        
208

444
Permit and Burn Authorization for Open Burning
Open Burning (BCM-04)
    √

√
1139 Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities (CTS-03) √    
1143 Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners (CTS-04) √    
1147 NOx Reductions from Miscellaneous Sources (CMB-01) √    
1162 Polyester Resin Operations
(MCS-07)
√    
4010*



4020*
Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions (MOB-03)
Backstop of Requirements for New and Modified Port Projects (MOB-03)
√



√
√



√
 
December        
222 Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II     √
317 Clean Air Act Emissions Fees for Major Stationary Sources of VOC and NOx √    
1112.1 Emissions of Particulate Matter from Cement Kilns     √


2009

January   AQMP TOXICS OTHER
1156.1 Control of Hexavalent Chromium Emissions from Cement Manufacturing Facilities   √  


TO-BE-DETERMINED 2008

To-Be-Determined   AQMP TOXICS OTHER
102 Definition of Terms     √
Reg. II Permits     √
401 Visible Emissions     √
402 Nuisance     √
403 Fugitive Dust     √
404
1114*
Particulate Matter – Concentration
Control of Emissions from Refinery Coking Operations
√
√
   
407 Liquid and Gaseous Air Contaminants     √
461 Gasoline Transfer and Dispensing (FUG-02) √    
462 Organic Liquid Loading     √
463 Storage of Organic Liquids     √
Reg. IV
Reg. XI
Prohibitions
Source Specific Standards
(MCS-07)
    √
√
701 Air Pollution Emergency Contingency Actions     √
1106.1 Pleasure Craft Coating Operations √    
1107 Coating of Metal Parts and Products     √
1108.1 Emulsified Asphalt (FUG-03)     √
1118 Control of Emissions from Refinery Flares     √
1121* + Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters √   √
1124 Aerospace Assembly and Component Manufacturing Operations (MCS-01) √    
1127 Emission Reductions from Livestock Waste     √
1127.1+ Control of Emissions from Hog and Poultry Operations √   √
1133.3 Emissions Reduction from Green Waste Composting √    
1134 Emissions of Oxides of Nitrogen from Stationary Gas Turbines     √
1136 Wood Products Coatings     √
1142 Marine Tank Vessel Operations     √
1146.2 Emissions of Oxides of Nitrogen from Large Water Heaters and Small Boilers and Process Heaters (MCS-07) √    
1151*+ Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations     √
1168 Adhesive and Sealant Applications     √
1171 Solvent Cleaning Operations     √
1174 Control of Volatile Organic Compound Emissions from the Ignition of Barbecue Charcoal     √
1180 Petroleum Refinery Pilot Program (FLX-02) √    
1186.1
1193


1195
Less Polluting Sweepers
Clean On-Road Residential and Commercial Refuse Collection Vehicles
Clean On-Road School Buses
    √
√


√
1192 Clean On-Road Transit Buses     √
1190 Series Fleet Vehicle Requirements     √
1309 Emission Reduction Credits     √
1309.1 Priority Reserve     √
Reg. XIII New Source Review     √
1401

1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
  √

√
 
1402.1* Control of Toxic Air Contaminants from Existing Sources Located Near Sensitive Receptors   √  
1407 Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations   √  
1420 Emissions Standard for Lead   √  
1421 Control of Perchloroethylene Emissions from Dry Cleaning Systems   √  
1426 Emissions from Metal Finishing Operations   √  
1437* Furniture Stripping Operations   √  
1470


1471
Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines
Agricultural Stationary Compression Ignition Engines
  √


√
 
Reg. XVI
Reg. XXV
Credit Generation
Intercredit Trading
    √
√
Reg. XVII Prevention of Significant Deterioration (PSD)     √
2202 On-Road Motor Vehicle Mitigation Options √   √
3501 Recordkeeping for Locomotive Idling     √
3502 Minimization of Emissions from Locomotive Idling     √
3503 Emission Inventory and Health Risk Assessment for Railyards     √
3504 Diesel Risk Reductions for Railyard Operations     √
3510 Indirect Source Rule for Off-Road Mobile Vehicles and Equipment √    
3511 Indirect Source Rule for On-Road Mobile Sources √    
Reg. IV, IX, X, XI, XIV, and XX Rules Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment. The Air Toxics Control Plan (ATCP) is being updated to include new measures to address toxic emissions in the basin. The revised ATCP will include a variety of measures that will reduce exposure to air toxics from stationary, mobile, and area sources. √ √ √
Note: AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment to public health or welfare, state regulatory requirements or SIP commitment.

Attachment  (doc 230 kb)
MS Word reader link
 




This page updated: June 26, 2015
URL: ftp://lb1/hb/2008/July/080728a.htm