BOARD MEETING DATE: September 5, 2008
AGENDA NO. 29

REPORT:

Rule and Control Measure Forecast

SYNOPSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2008.

COMMITTEE:

Not Applicable

RECOMMENDED ACTIONS:

Receive and file.
 

Barry R. Wallerstein, D.Env.
Executive Officer


The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule. Scheduling changes that occurred since last month’s forecast are summarized.

433 + Natural Gas Fuel Specification (CMB-04)
Proposed Rule is moved to the First Quarter of 2009 from October to allow additional time for technical analysis and shareholder input.
1108 Cutback Asphalt (FUG-03)
Amendments to Rule 1108 will not go forward at this time. A Technology Assessment indicates a rule amendment is not required because it will not result in a VOC emission reduction. (See attachment D)
1112.1 Emissions of Particulate Matter from Cement Kilns
Rule 1112.1 is moved to the First Quarter of 2009 from December to allow for completion of CO CEMS certification and collection of data to support the proposed limits.
1139 Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities (CTS-03)
Rule 1139 is moved to the First Quarter of 2009 from November to review pending results of CARB rulemaking on consumer products which is scheduled for later this year.
1143 Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners (CTS-04)
Rule 1143 is moved to December from November to allow for additional review and input from stakeholders.
1144 VOC Emission Reductions from Lubricants (CTS-01)
Proposed Rule 1144 is moved to December from October to collect further data and test results for the feasibility of the proposed rule.
1145 Plastic, Rubber, and Glass Coatings
Rule 1145 is moved to the First Quarter of 2009 from October to allow further review and assessment of potentially compliant coatings.
1147 NOx Reductions from Miscellaneous Sources (CMB-01)
Proposed Rule 1147 is moved to December from November to allow additional time for public review and stakeholder input.
1155 Particulate Matter Control Devices (BCM-01)
Proposed Rule 1155 is moved to the First Quarter of 2009 from October to allow more time for technical analysis and stakeholder input.
1156
1156.1
Further Reductions of Particulate Emissions from Cement Manufacturing Facilities
Control of Hexavalent Chromium Emissions from Cement Manufacturing Facilities
Rule 1156.1 is removed from the calendar and its scope is consolidated into Rule 1156, which is being moved to January 2009 from October to allow additional time for technical analysis and stakeholder input.
1162 Polyester Resin Operations (MCS-07)
Rule 1162 is moved to the First Quarter of 2009 from November to allow for evaluation of laboratory and performance testing of resin samples.
1469 Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations
Rule 1469 is moved to December from October to allow staff additional time to work with stakeholders.
1903* Emission Budgets and Mitigation Program for General Conformity Projects (EGM-02)
Proposed Rule 1903 is moved the First Quarter of 2009 from October to allow for additional time for rule development and public input.
Reg. XX Regional Clean Air Incentives Market (RECLAIM) (CMB-02)
The proposed amendments to Regulation XX are being moved to January of 2009 from October in order to conduct an independent technical assessment of potential areas of emissions reductions. The technical assessment is projected to be completed in the first quarter of 2009.
2700
2701
2702
Definition
SoCal Climate Solutions Exchange
SoCal Climate Solutions Exchange Air Quality Investment Program (AQIP)
Regulation XXVII is being added to the calendar for November Public Hearing to implement the SoCal Climate Solutions Exchange, a voluntary program for quanitification and certification of voluntary, early greenhouse gas emission reductions in the District.
4010*

4020*
Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions (MOB-03)
Backstop of Requirements for New and Modified Port Projects (MOB-03)
The proposed backstop rules are moved to December from November to allow additional time for technical analysis and stakeholder input.

2008 MASTER CALENDAR
Advance Target for Board Hearings

Below is a list of all rulemaking activity scheduled for the year 2008. The last three columns refer to the type of rule adoption or amendment: AQMP refers to the adoption and implementation of AQMP control measures (Attachment A); Toxics refers to the adoption and implementation of programmatic as well as source-specific toxic-related rules (Attachment B); and Other refers to administrative rules or changes to an existing rule to clarify or improve rule enforceability, SIP corrections, or implementing state or federal regulations (Attachment C). The Technical Assessment for Rule 1108 – Cutback Asphalt (Attachment D). A more detailed description of the proposed rule adoption or amendment is located after this calendar under the type of rule adoption or amendment (i.e. AQMP, Toxics, and Other).
Attachment D

*An asterisk indicates that the rulemaking is a potentially significant hearing.
+This proposed rule will reduce criteria air contaminants and assist toward attainment
of ambient air quality standards.

2008

October   AQMP TOXICS OTHER
1302
1303
1701
1702
1703
Definitions
Requirements
General
Definition
Analysis
    √
√
√
√
√
November        
208
444
Permit and Burn Authorization for Open Burning
Open Burning (BCM-04)
    √
√
2700
2701
2702
Definition
SoCal Climate Solutions Exchange
SoCal Climate Solutions Exchange Air Quality Investment Program (AQIP)
    √
√
√
December        
222 Filing Requirements for Specific Emission Sources Not Requiring a Written Permit Pursuant to Regulation II     √
317 Clean Air Act Emissions Fees for Major Stationary Sources of VOC and NOx √    
1143 Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners (CTS-04) √    
1144 VOC Emission Reductions from Lubricants (CTS-01) √    
1147 NOx Reductions from Miscellaneous Sources (CMB-01) √    
1469 Hexavalent Chromium Emissions from Chrome Plating and Chromic Acid Anodizing Operations   √  
4010*


4020*
Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions (MOB-03)
Backstop of Requirements for New and Modified Port Projects (MOB-03)
√


√
√


√
 


2009

January   AQMP TOXICS OTHER
1156 Further Reductions of Particulate Emissions from Cement
Manufacturing Facilities
  √ √
Reg. XX Regional Clean Air Incentives Market (RECLAIM) (CMB-02) √    
1st Quarter        
433 + Natural Gas Fuel Specification (CMB-04) √    
1112.1 Emissions of Particulate Matter from Cement Kilns     √
1139 Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities (CTS-03) √    
1145 Plastic, Rubber, and Glass Coatings √    
1155 Particulate Matter Control Devices (BCM-01) √    
1162 Polyester Resin Operations
(MCS-07)
√    
1903* Emission Budgets and Mitigation Program for General Conformity Projects (EGM-02) √    


TO-BE-DETERMINED 2008

To-Be-Determined   AQMP TOXICS

OTHER

102 Definition of Terms     √
Reg. II Permits     √
401 Visible Emissions     √
402 Nuisance     √
403 Fugitive Dust     √
404
1114*
Particulate Matter – Concentration
Control of Emissions from Refinery Coking Operations
√
√
   
407 Liquid and Gaseous Air Contaminants     √
461 Gasoline Transfer and Dispensing (FUG-02) √    
462 Organic Liquid Loading     √
463 Storage of Organic Liquids     √
Reg. IV
Reg. XI
Prohibitions
Source Specific Standards
(MCS-07)
    √
√
701 Air Pollution Emergency Contingency Actions     √
1106.1 Pleasure Craft Coating Operations √    
1107 Coating of Metal Parts and Products     √
1108.1 Emulsified Asphalt (FUG-03)     √
1118 Control of Emissions from Refinery Flares     √
1121* + Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters √   √
1124 Aerospace Assembly and Component Manufacturing Operations (MCS-01) √    
1127 Emission Reductions from Livestock Waste     √
1127.1+ Control of Emissions from Hog and Poultry Operations √   √
1133.3 Emissions Reduction from Green Waste Composting √    
1134 Emissions of Oxides of Nitrogen from Stationary Gas Turbines     √
1136 Wood Products Coatings     √
1142 Marine Tank Vessel Operations     √
1146.2 Emissions of Oxides of Nitrogen from Large Water Heaters and Small Boilers and Process Heaters (MCS-07) √    
1151*+ Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations     √
1168 Adhesive and Sealant Applications     √
1171 Solvent Cleaning Operations     √
1174 Control of Volatile Organic Compound Emissions from the Ignition of Barbecue Charcoal     √
1180 Petroleum Refinery Pilot Program (FLX-02) √    
1186.1
1193

1195
Less Polluting Sweepers
Clean On-Road Residential and Commercial Refuse Collection Vehicles
Clean On-Road School Buses
    √
√

√
1192 Clean On-Road Transit Buses     √
1190 Series Fleet Vehicle Requirements     √
1309 Emission Reduction Credits     √
1309.1 Priority Reserve     √
Reg. XIII New Source Review     √
1401
1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
  √
√
 
1402.1* Control of Toxic Air Contaminants from Existing Sources Located Near Sensitive Receptors   √  
1407 Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations   √  
1420 Emissions Standard for Lead   √  
1421 Control of Perchloroethylene Emissions from Dry Cleaning Systems   √  
1426 Emissions from Metal Finishing Operations   √  
1437* Furniture Stripping Operations   √  
1470

1471
Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines
Agricultural Stationary Compression Ignition Engines
  √

√
 
Reg. XVI
Reg. XXV
Credit Generation
Intercredit Trading
    √
√
Reg. XVII Prevention of Significant Deterioration (PSD)     √
2202 On-Road Motor Vehicle Mitigation Options √   √
3501 Recordkeeping for Locomotive Idling     √
3502 Minimization of Emissions from Locomotive Idling     √
3503 Emission Inventory and Health Risk Assessment for Railyards     √
3504 Diesel Risk Reductions for Railyard Operations     √
3510 Indirect Source Rule for Off-Road Mobile Vehicles and Equipment √    
3511 Indirect Source Rule for On-Road Mobile Sources √    
Reg. IV, IX, X, XI, XIV, and XX Rules Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment. The Air Toxics Control Plan (ATCP) is being updated to include new measures to address toxic emissions in the basin. The revised ATCP will include a variety of measures that will reduce exposure to air toxics from stationary, mobile, and area sources. √ √ √
Note: AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment to public health or welfare, state regulatory requirements or SIP commitment.

 

Attachment (ZIP, 181k)
Rule Forecast




This page updated: June 26, 2015
URL: ftp://lb1/hb/2008/September/080929a.htm