BOARD MEETING DATE: January 9, 2009
AGENDA NO. 10

REPORT:

Rule and Control Measure Forecast

SYNOPSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2009.

COMMITTEE:

Not Applicable

RECOMMENDED ACTION:

Receive and file.
 

Barry R. Wallerstein, D.Env.
Executive Officer


The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule. Scheduling changes that occurred since last month’s forecast are summarized.

317

Clean Air Act Emissions Fees for Major Stationary Sources of VOC and NOx
Rule 317 is continued to February by direction of the Board to allow consideration of any forthcoming guidance from U.S.EPA and allow consideration of alternative emission baseline determination methods.

1143

Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners (CTS-04)
Rule 1143 is moved to February from January to allow staff additional time to address public comments made since the Set Hearing and to consider significant changes to the rule language.

1144

VOC Emission Reductions from Lubricants (CTS-01)
Rule 1144 is moved to February from January to allow for additional staff analysis and input from stakeholders.

1155

Particulate Matter Control Devices (BCM-01)
Rule 1155 is moved to May from March to allow additional staff time for analyses and public input.

1156

Further Reductions of Particulate Emissions from Cement Manufacturing Facilities
Rule 1156 is moved to March from February to accommodate a mobile public hearing in the affected community.

1173

Fugitive Emissions of Volatile Organic Compounds and Releases from Components of Petroleum Facilities and Chemical Plants
Amendment of Rule 1173 is moved forward to February to correct paragraph (l)(5) to reference paragraphs (h)(6) and (h)(7) instead of (h)(4) and (h)(5).

Reg. IX
Reg. X

Standards for Performance for New Stationary Sources
National Emission Standards for Hazardous Air Pollutants
Regulations IX and X are moved to April from February to allow staff time to prepare appropriate regulatory documentation.

2009

1st Quarter   AQMP TOXICS OTHER
1302
1303
1701
1702
1703
Definitions
Requirements
General
Definition
Analysis
    √
√
√
√
√
February        
317 Clean Air Act Emissions Fees for Major Stationary Sources of VOC and NOx √    
1143 Reduction of VOC Emissions from Lacquer Thinners and Paint Thinners (CTS-04) √    
1144 VOC Emission Reductions from Lubricants (CTS-01) √    
1173 Fugitive Emissions of Volatile Organic Compounds and Releases from Components of Petroleum Facilities and Chemical Plants     √
2701 SoCal Climate Solutions Exchange     √
March        
1156 Further Reductions of Particulate Emissions from Cement Manufacturing Facilities   √ √
1401 New Source Review of Toxic Air Contaminants   √  
April        
102 Definition of Terms     √
433 + Natural Gas Fuel Specification (CMB-04) √    
Reg. IX

Reg. X
Standards for Performance for New Stationary Sources
National Emission Standards for Hazardous Air Pollutants
  √

√
Reg. XX Regional Clean Air Incentives Market (RECLAIM) (CMB-02) √    
4010* Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions (MOB-03) √ √  
May        
Reg. III Fees     √
1155 Particulate Matter Control Devices (BCM-01) √    
1470



1471
Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines
Agricultural Stationary Compression Ignition Engines
  √



√
 
2511 Credit Generation Program for Locomotive Head End Power Unit Engines     √
June        
1111 NOx Emissions from Natural Gas-Fired Fan Type Central Furnaces (CMB-03) √    
1138 Charbroilers (BCM-05) √    
1145 Plastic, Rubber, and Glass Coatings     √
1420 Emissions Standard for Lead   √  
July        
1139 Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities (CTS-03) √    
2301 Control of Emissions from New or Redevelopment Projects √    
September        
1124 Aerospace Assembly and Component Manufacturing Operations (MCS-01) √    
1133.3 Green Waste Composting (MCS-05) √    
October        
461 Gasoline Transfer and Dispensing (FUG-02) √    
1127 Emission Reductions from Livestock Waste (MCS-05) √    
1127.1 Control of Emissions from Hog and Poultry Operations (MCS-05) √   √
1162 Polyester Resin Operations (MCS-07) √    
1315 Federal New Source Review Tracking System     √
November        
402 Nuisance     √
404
1114*
Particulate Matter – Concentration (MCS-01)
Control of Emissions from Refinery Coking Operations (MCS-01)
√
√
   
1903* Emission Budgets and Mitigation Program for General Conformity Projects (EGM-02) √    
December        
Reg. XIII New Source Review (NSR) (PM2.5)     √

2009 TO-BE-DETERMINED

To-Be-Determined   AQMP TOXICS OTHER
Reg. II Permits     √
Reg. IV Prohibitions     √
462 Organic Liquid Loading     √
463 Storage of Organic Liquids     √
Reg. V Procedures Before the Hearing Board     √
Reg. XI Source Specific Standards
(MCS-07)
    √
1106 Marine Coating Operations     √
1106.1 Pleasure Craft Coating Operations (MCS-01) √    
1107 Coating of Metal Parts and Products     √
1112.1 Emissions of Particulate Matter from Cement Kilns     √
1113 Architectural Coatings     √
1115 Motor Vehicle Assembly Line Coating Operations     √
1118 Control of Emissions from Refinery Flares     √
1123 Pilot Program for Refinery Start-up, Shutdown and Turnaround Procedures (MCS-06) √    
1136 Wood Products Coatings     √
1145 Plastic, Rubber, and Glass Coatings     √
1151*+ Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations     √
1168 Adhesive and Sealant Applications     √
1171 Solvent Cleaning Operations     √
1180 Petroleum Refinery Pilot Program (FLX-02) √    
1190 Series Fleet Vehicle Requirements     √
Reg. XIII New Source Review     √
1401

1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
  √

√
 
1407 Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations   √  
1421 Control of Perchloroethylene Emissions from Dry Cleaning Systems   √  
1415 Reduction of Refrigerant Emissions from Stationary Refrigerant and Air Conditioning Systems     √
1426 Emissions from Metal Finishing Operations   √  

1480
Major Diesel Indirect Sources   √  
1610 Old-Vehicle Scrapping     √
1625 Generation of ERCs for Particulate Matter     √
Reg. XVII Prevention of Significant Deterioration (PSD)     √
2000 General     √
2005 New Source Review for RECLAIM     √
2202 On-Road Motor Vehicle Mitigation Options √   √
Reg. IV, IX, X, XI, XIV, and XX Rules Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment. The Air Toxics Control Plan (ATCP) is being updated to include new measures to address toxic emissions in the basin. The revised ATCP will include a variety of measures that will reduce exposure to air toxics from stationary, mobile, and area sources. √ √ √

Note:

AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment to public health or welfare, state regulatory requirements or SIP commitment.

ATTACHMENT (DOC, 228k)




This page updated: June 25, 2015
URL: ftp://lb1/hb/2009/January/090110a.htm