BOARD MEETING DATE: June 5, 2009
AGENDA NO. 24

REPORT:

Rule and Control Measure Forecast

SYNOPSIS:

This report highlights AQMD rulemaking activity and public workshops potentially scheduled for the year 2009.

COMMITTEE:

Not Applicable

RECOMMENDED ACTION:

Receive and file.
 

Barry R. Wallerstein, D.Env.
Executive Officer


The Rule and Control Measure Forecast Report provides the Board with a monthly update of AQMD’s rulemaking and control measure implementation schedule. Scheduling changes that occurred since last month’s forecast are summarized.

1124 Aerospace Assembly and Component Manufacturing Operations (MCS-01)
Rule 1124 is moved to November from September to allow staff additional time to conduct a thorough technology review.
1138 Charbroilers (BCM-05)
Rule 1138 is moved to December from September to allow additional time to analyze potential impacts and provide additional opportunities for public input.
1193 Clean On-Road Residential and Commercial Refuse Collection Vehicles
Because of the SCAQMD staff’s effort to secure federal stimulus – Department of Energy Grants, Rule 1193 is moved to September from July.

2009

*An asterisk indicates that the rulemaking is a potentially significant hearing.

+ This proposed rule will reduce criteria air contaminants and assist toward attainment
of ambient air quality standards.

1Subject to Board approval

California Environmental Quality Act shall be referred to as "CEQA."

Socioeconomic Analysis shall be referred to as "Socio."

September   AQMP TOXICS OTHER
102 Definition of Terms     √
1112.1 Emissions of Particulate Matter from Cement Kilns     √
1145 Plastic, Rubber, and Glass Coatings     √
1155+ Particulate Matter Control Devices (BCM-01) √    
11931 Clean On-Road Residential and Commercial Refuse Collection Vehicles     √
2511 Credit Generation Program for Locomotive Head End Power Unit Engines     √
October        
461 Gasoline Transfer and Dispensing (FUG-02) √    
1111+ NOx Emissions from Natural Gas-Fired Fan Type Central Furnaces (CMB-03) √    
1127+ Emission Reductions from Livestock Waste (MCS-05) √    
1127.1+ Control of Emissions from Hog and Poultry Operations (MCS-05) √   √
1162+ Polyester Resin Operations (MCS-07) √    
1315 and 1309.2* Federal New Source Review Tracking System & Offset Budget     √
Reg. XX*+ Regional Clean Air Incentives Market (RECLAIM) (CMB-02) √    
2301*+ Control of Emissions from New or Redevelopment Projects √    
October   AQMP TOXICS OTHER
4010* Backstop of Port Standards for Non-Attainment Pollutants and Health Risk for Diesel Particulate Emissions (MOB-03) √ √  
November        
402 Nuisance     √
404+
1114*+
Particulate Matter – Concentration (MCS-01)
Control of Emissions from Refinery Coking Operations (MCS-01)
√
√
   
1124+1 Aerospace Assembly and Component Manufacturing Operations (MCS-01) √    
1139+ Reduction of VOC Emissions from Cleaning Operations at Large Institutional and Commercial Facilities (CTS-03) √    
1470



1471
Requirements for Stationary Diesel-Fueled Internal Combustion and Other Compression Ignition Engines
Agricultural Stationary Compression Ignition Engines
  √



√
 
1903* Emission Budgets and Mitigation Program for General Conformity Projects (EGM-02) √    
December        
1133.3+ Green Waste Composting (MCS-05) √    
1138*+1 Charbroilers (BCM-05) √    
Reg. XIII* New Source Review (NSR) (PM2.5)     √
1420 Emissions Standard for Lead   √  

2009 TO-BE-DETERMINED

To-Be-Determined   AQMP TOXICS OTHER
Reg. II Permits √
Reg. IV Prohibitions √
462 Organic Liquid Loading √
463 Storage of Organic Liquids √
Reg. V Procedures Before the Hearing Board √
Reg. XI Source Specific Standards
(MCS-07)
    √
1106 Marine Coating Operations √
1106.1 Pleasure Craft Coating Operations (MCS-01) √
1107 Coating of Metal Parts and Products √
1113 Architectural Coatings √
1115 Motor Vehicle Assembly Line Coating Operations √
1118 Control of Emissions from Refinery Flares √
1123 Pilot Program for Refinery Start-up, Shutdown and Turnaround Procedures (MCS-06) √    
1136 Wood Products Coatings √
1145 Plastic, Rubber, and Glass Coatings √
1151*+ Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations     √
1168 Adhesive and Sealant Applications √
1171 Solvent Cleaning Operations √
1180 Petroleum Refinery Pilot Program (FLX-02) √
1190 Series Fleet Vehicle Requirements √
Reg. XIII New Source Review √
1302
1303
1701
1702
1703
Definitions
Requirements
General
Definition
Analysis
    √
√
√
√
√
1401

1402
New Source Review of Toxic Air Contaminants
Control of Toxic Air Contaminants from Existing Sources
  √

√
 
1407 Control of Emissions of Arsenic, Cadmium, and Nickel from Non-Ferrous Metal Melting Operations   √  
1421 Control of Perchloroethylene Emissions from Dry Cleaning Systems   √  
1415 Reduction of Refrigerant Emissions from Stationary Refrigerant and Air Conditioning Systems     √
1426 Emissions from Metal Finishing Operations √
1480 Major Diesel Indirect Sources √
1610 Old-Vehicle Scrapping √
1625 Generation of ERCs for Particulate Matter √
Reg. XVII Prevention of Significant Deterioration (PSD) √
2000 General √
2005 New Source Review for RECLAIM √
2202 On-Road Motor Vehicle Mitigation Options √ √
Reg. IV, IX, X, XI, XIV, and XX Rules Various rule amendments may be needed to meet the requirements of state and federal laws (e.g., SB 700), address variance issues/technology-forcing limits, or to seek additional reductions to meet the SIP short-term measure commitment. The Air Toxics Control Plan (ATCP) is being updated to include new measures to address toxic emissions in the basin. The revised ATCP will include a variety of measures that will reduce exposure to air toxics from stationary, mobile, and area sources. √ √ √
Note: AQMD may add control measures necessary to satisfy federal requirements, to abate a substantial endangerment to public health or welfare, state regulatory requirements or SIP commitment.

Attachment (DOC, 196k)

Rule Forecast




This page updated: June 25, 2015
URL: ftp://lb1/hb/2009/June/090624a.htm